Alpine 35278 - Typical System Connections: 2-Channel Operation-B

2-CHANNEL OPERATION-B: Non-Fading Subwoofers
SWITCH SETTINGS
INPUT MODE FILTER INPUT CHANNEL ACOUSTIC COMPENSATION
on| Coal a
OFF HP LP
co) St HTH Sibioctara
—1o
BAH
CH 3/4
of dp ‘Tp
cHtajwoo) er Boo Subwoofers
(+) (+)
CH 1/2 i
cael
| CH 3/4
Subwoofer
(2)
RCA
Extension
Cable
E83 Battery (+) Lead
E
BECKS Ground Lead
aaa t
Input :
Leads :
CH 4(-)(Violet/Black)
CH 4(+)(Violet)
CH 3(-)(Green/Black)
CH 3(+)
(Green)
U
mm 0 <c Tirce
mH] 0 <c{ im
iw
Head Unit with a
Speaker Outputs Only ®
Remote
Head Unit or Signal Processor} Turn-On or ;
with Front and Rear Pre-Amp | Power Ante:
Outputs ® *
Notes: * Use Connection ® or © , But Never Both.
** +12V Should be Supplied to this Terminal to Turn the 3527S On.
*** Extension Cables are Soid Separately.
Remote Turn-On Lead
17