Alpine 35278 - Switches and Terminals Identification; Safety Precautions for Amplifier Use

Refer to Fig. 1 on page 5.
@ Status Monitor
@ Acoustic Compensation Switch
@ Input Gain Adjustment Control (Channels 1/2)
@® Active Dividing Network Mode Selector Switch (Channels 1/2)
© Input Mode Selector Switch (Channels 1/2)
© Input Gain Adjustment Control (Channels 3/4)
Active Dividing Network Mode Selector Switch (Channels 3/4)
Input Mode Selector Switch (Channels 3/4)
Input Channel Selector Switch
RCA Input Jacks (Channels 1/2)
QO@e9
Speaker Output Terminals (Channels 1/2)
Fuse Block
Battery Lead Terminal
Remote Turn-On Lead Terminal
Ground Lead Terminal
RCA Input Jacks (Channels 3/4)
Speaker Input Connector
Speaker Output Terminals (Channels 3/4)
BOGQOOO
@ Improper wiring connections could cause damage to your vehicle's electrical
system and/or the 3527S amplifier. Carefully follow the wiring instructions in this
manual.
@ Attaching the battery lead to the positive (+) terminal of the battery should be the
last connection after all other connections are made.
@ Due to the high power output of the 3527S, it is important that all connections are
clean and well secured, or damage could result.
@
Be
sure
that
the
3527S
is
mounted
in
a
way
that
will
allow
for
free
air
circulation
and
heat
dissipation.
@ When changing fuses, be sure to replace the old fuse with one of the same
amperage. Use of improper fuses can lead to serious damage to components.
10