Alpine 7525R - Clock Operation

CD Display Switching
In
the
CD
mode,
the
display
will
show
the
Disc
and
Track
Number
(Fig.
A)
or
the
Elapsed
Time
(Fig.
B).
Press
the
DISP
button
@6)
to
select
between
the
Disc/Track
number
and
the Elapsed
Time
indicators.
3
TRACK - 07
Fig. A Fig. B
NOTE:
In
the
A.P.|.
or
T.
INFO
mode,
even
if
the
DISP
button
@6
is
pushed,
the
display
can
not
be
switched.
The
mode
will
be
set
to
the
tuner
mode
and
the
tuning
is
possible.
@ CLOCK OPERATION
RDS Clock
1. Press the CLOCK button @). The clock time will appear on the display.
2.
The
clock
is
automatically
corrected,
the
dot
matrix
display
@
showing
“R",
when
RDS
CT data is received.
R 12:00
NOTE:
lf the RDS signal in reception is weak, the time adjustment by RDS function may require
a little longer time.
3. If the unit shows incorrect time caused by a wrong signal, adjust the time manually by
referring to “Setting the Time” below.
Normal Clock
1. Press and hold the CLOCK button @) for more than 3 seconds.
2. Press the CT button @ to deactivate the RDS function.
3. Adjust the time by referring to the “Setting the Time” below.
T2 700
Setting the Time
1. Press and hold the CLOCK button @ for more than 3 seconds to enable the time
adjust mode. The time display will blink when ready for setting.
NOTE:
Make adjustments for 5 seconds blinking.
2. Adjusting the hours:
Use H button 48 to adjust the hours.
3. Adjusting the minutes:
Use M button 46 to adjust the minutes.
20