Alpine CD Shuttle Controller 7292MS - Page 6

FULL FRONT DIN™ CHASSIS
CD SHUTTLE CONTROL
SCC TAPE HEAD™
The SCC tape head provides an exceptionally flat frequency response.
Q.R.B. (QUICK RELEASE BRACKET)
Alpine’s exclusive Q.R.B. design allows for easy removal of the 7292MS, while still
maintaining memory. The 7292MS may then be carried with the owner for theft
prevention.
A. MEMO (AUTO MEMORY)
In the Auto Memory mode, the 6 strongest FM, MW or LW stations will automatically
be stored in preset memory.
D.A.P. (DIRECT ACCESS PRESET)
D.A.P. allows the storage of FM, MW and LW presets on the same band, eliminating
the need to press the TUNER/BAND button. Up to 6 FM, and MW/LW stations can be
mixed in the D.A.P. Band.
PRESET SCAN (INTELLIGENT PRESET SCAN)
MUSIC SENSOR IN FAST FORWARD AND REWIND
M.I.X. (RANDOM PLAY-CD only)
REPEAT (CD)
When activated while you are listening to your favorite music selection, the music will
play over and over.
SCAN (CD)
It scans quickly and plays the beginning of each music selection for ten seconds.
When you locate the selection of your choice, press the button again to play it till the
end.
DOLBY* B NOISE REDUCTION
LOUDNESS CONTROL AND INDICATOR
LITETOUCH™ 30-STATION PRESETS
6-FM1; 6-FM2; 6-MW; 6-LW; 6-D.A.P.
SDK FUNCTION
SELECTABLE FADER
This system allows you to select either the pre-amp or power amp fader mode. The
pre-amp fader controls the signal level in the pre-amp stage for two amplifiers, and the
power amp fader balances the front and rear speaker sound in a four-speaker system
using the unit's internal power.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation. “DOLBY” and the double-D symbol ( 0 ) are trademarks of Dolby
Laboratories Licensing Corporation.