EasyManuals Logo

Alpine CDA-117 User Manual

Alpine CDA-117
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
10-EN
Receiving a Multicast Station (HD Radio™
mode only)
Multicasting is the Ability to broadcast multiple program streams over a
single FM frequency. This increases the amount and diversity of content
choices. A maximum of eight multicast station channels can be selected
on this unit.
When multicast station is received, the program number and the SPS
indicator lights up.
1
Press or to select the desired program service.
Receiving the Multicast Station Program Service.
Program Service example:
The RBDS (Radio Broadcast Data System) is a radio information
system. The RBDS allows you to receive a variety of information such as
traffic information, station names.
The RBDS digital data includes the following:
Setting the Time to automatically Adjust
When you set to ON, the time is automatically adjusted by RBDS data.
1
Press and hold SETUP for at least 2 seconds to activate the
SETUP mode.
2
Turn the Rotary encoder to select the Tuner mode, and
then press ENTER.
Bluetooth
*1
General Display Tuner
*2
/HD Radio
*3
XM
*4
/
SIRIUS
*5
Bluetooth
*1 Displayed only when INT Mute is OFF, and the mode is set to
other than Bluetooth Audio.
*2 Not displayed when HD Radio Tuner module is connected.
*3 Only when HD Radio Tuner module is connected.
*4 Only when XM Radio is connected.
*5 Only when SIRIUS Radio is connected.
3
Turn the Rotary encoder to select Auto Clock, and then
press ENTER.
4
Turn the Rotary encoder to select ON or OFF.
5
Press and hold SETUP for at least 2 seconds to return to
normal mode.
Notes
•Pressing ESC during the procedure will return to the previous
mode.
If no operation is performed for 60 seconds in the SETUP mode, the
setting mode is canceled.
Multicast
Radio Station
Program No. Program Service
90.3 MHz No.1 MPS: Main Program Service
90.3 MHz No.2 SPS: Sub-program Service
90.3 MHz No.3 SPS: Sub-program Service
90.3 MHz No.4 SPS: Sub-program Service
90.3 MHz No.5 SPS: Sub-program Service
90.3 MHz No.6 SPS: Sub-program Service
90.3 MHz No.7 SPS: Sub-program Service
90.3 MHz No.8 SPS: Sub-program Service
SPS Indicator
Program No.
RBDS
PS Program Service Name
TP Traffic Program
TA Traffic Announcement
FUNC./SETUP
/ESC
BAND
TA
3 PTY
VIEW
Tag
Rotary encoder/ENTER/

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alpine CDA-117 and is the answer not in the manual?

Alpine CDA-117 Specifications

General IconGeneral
Tuner TypeAM/FM
CD PlaybackYes
MP3 PlaybackYes
WMA PlaybackYes
AAC PlaybackYes
Built-in AmplifierYes
Preamp Outputs6-channel
Preamp Voltage4 volts
Display TypeDot Matrix
USB InputYes
Auxiliary InputYes
TypeCD Receiver
DIN SizeSingle DIN
Faceplate SecurityDetachable
Peak Power Output50 watts x 4 channels
RMS Power Output18 watts x 4 channels
Subwoofer OutputYes
Display ColorWhite
CD Signal-to-Noise105 dB
CEA-2006 CompliantYes
iPod CompatibilityYes
Remote ControlOptional
Built-in DisplayYes
Channels4
Time AlignmentYes
CrossoverYes
Satellite RadioOptional
EQ7-band

Related product manuals