Alpine CDA-7832R - Troubleshooting: CD Shuttle Indications; HI TEMP Indication; ERROR-01: Shuttle Malfunction; ERROR-02: Disc Left in Shuttle

108
English
English/Français/Español
In Case of Difficulty
Indication for CD Shuttle
Cause and SolutionIndication/Indication/Indicación
• Protective circuit is activated due to high
temperature.
– The indicator will disappear when the
temperature returns to within operation
range.
• Malfunction in the CD Shuttle.
– Consult your Alpine dealer.
Press the magazine eject button and pull
out the magazine. Check the indication.
Insert the magazine again. If the
magazine cannot be pulled out, consult
your Alpine dealer.
• Magazine ejection not possible.
– Press the magazine eject button.
If the magazine does not eject, consult
your Alpine dealer.
• A disc is left inside the CD Shuttle.
– Press the EJECT button to activate the
eject function. When the CD Shuttle
finishes the eject function, insert an
empty CD magazine into the CD Shuttle
to receive the disc left inside the CD
Shuttle.
• No magazine is loaded into the CD Shuttle.
– Insert a magazine.
• No indicated disc.
– Choose another disc.
HI TEMP
ERROR-01
ERROR-02
NO DISC
NO MAGZN