26
English
Basic Operation
Press and hold the PWR button for more than 3
seconds.
INTLZ
PWR
Press the BAND button and the display shows
"BEEP ON."
Pressing the button again turns the Sound Guide
function off. "BEEP OFF" will be displayed and no
tones will be heard.
BEEP ON
BEEP OFF
INTLZ
PWR
Changing Lighting Col-
our
Press the PWR button for at least 3 seconds.
Press the Preset 6 button to change the lighting
colour between green and amber.
SCAN
6
GREEN
AMBER
Press the PWR button to set the lighting colour.
Sound Guide Function
This function will give audible feedback with
varying tones depending upon the button
pressed.
1
1
3
3
2
2
Press the PWR button to activate the normal
mode.
BAND
INTLZ
PWR
INTLZ
PWR
1 3
2
1 3
2
To Next Page
Loading...
