18
English
Basic Operation
Initial System Start-Up
1
2
1
Press the PWR (POWER) button to turn on the
unit.
Note: When the ignition key is turned on then
the power is turned on immediately after
installation or resetting, the A.S.U.
function is activated automatically.
Automatic Setup (A.S.U.)
This convenient feature sets up the unit
automatically after installation.
1
1
When operating the unit for the first time after
installation or after the vehicle's battery has
been disconnected and reconnected, set the
volume level to its minimum, then remove the
detachable front panel. Press the Reset switch
with a ball-point pen or any other pointed
object.
2
Press and hold the A.S.U. (Automatic Setup)
button for at least 3 seconds to activate the
A.S.U. mode.
"ASU" blinks in the display.
The unit automatically performs the following
operations.
1. Activates Auto Memory mode.
2. Gradually sets the Bass, Treble, Balance
and Fader controls to their center positions.
3. Gradually increases the volume to the
position 12 in the display.
4. Turns the Loudness on.
5. Ends the A.S.U. mode.
SOURCE
A.S.U.
INTLZ
PWR
To Next Page
Loading...
Need help?
General
