30
English
Basic Operation
Demonstration
In the Demonstration (DEMO) mode, the unit
scans each source; CD player and CD Shuttle.
Press and hold the DEMO button for at least 3
seconds to activate the DEMO mode.
"DEMO" blinks in the display.
The unit automatically performs the following
scanning operation.
1. Then the unit goes into the CD mode and
scans the selections on the loaded CD by
playing the first 10 seconds of each selection
starting with the first selection.
2. If a CD Shuttle is connected, the unit will go
into the CD mode. It will play the first 10
seconds of each track starting with track one
of the first disc.
3. The unit continues scanning of the sources
as described in 1 and 2 above.
Note: Depending on the device connected to
the CDA-7832R, not all functions or
display indications will operate as
described. For details, consult your
Alpine dealer.
1
1 2
DEMO
F
To end the DEMO mode, press the DEMO
button.
"DEMO" disappears from the display.
2
DEMO
DEMO
F
To Next Page
Loading...
