22
English
Basic Operation
Turning Loudness On/Off
1
Loudness introduces a special low- and high-
frequency emphasis at low listening levels. This
compensates for the ear’s decreased sensitivity
to bass and treble sound.
Press and hold the AUDIO CONTROL button
for at least 2 seconds to activate or deactivate
the loudness mode. The display shows "LOUD"
when the loudness mode is activated.
Note: Depending on the device connected to
the CDA-7832R, not all functions or
display indications will operate as
described. For details, consult your
Alpine dealer.
1
1 3
2
Press and hold the PWR button for at least 3
seconds.
1
Adjusting Source Signal
Levels
If the difference in volume level between the
CD player and FM radio is too great, adjust the
FM signal level as follows.
Press the Preset 1 button to select the FM
signal level HI (High) or LO (Low) to make the
signal levels between the FM band and CD
player closer.
2
FM-LV HI
FM-LV LO
RDS
1
Press the PWR button to cancel the adjusting
mode.
3
LOUD
INTLZ
PWR
INTLZ
PWR
To Next Page
Loading...
