Alpine CDA-W550E - Using the Function Button

17
English
Basic Operation
Using the Function Button
The chart below describes the function of each
preset button. The function will change
depending upon the source selected and the
condition of the FUNCTION switch, ON or OFF.
Note: This function is not available for the built-
in CD/cassette of this device.
Press the (FUNCTION) button. The
function mode will change each time you press
the button. (Refer to the chart below.)
Press any one of the – buttons.
1
2
RADIO
OFF ON OFF ON1 ON2
(12CD Shuttle
connected)
CD Shuttle
Function
Mode
Switch
*
Note: * When connecting to the CD Shuttle
applicable with CD Text.