53
English
Equalizer
Operation
1
2
3
Memorizing the
Equalizer Settings
Recalls the manufacturer's settings of the
surround and equalizer. In addition, allows you
to store your own sound preferences for later
recall. (Refer to page 49 – 52.)
Within 10 seconds after operating step , press
and hold any one of the Preset buttons ( –
) for at least 2 seconds. The indicators blink
for 10 seconds showing the unit is ready for
storing.
While the indicators are blinking, press the
Preset button ( – ) into which you wish
to store the selected equalization setting.
Repeat Steps to to store other settings.
The example shows the setting has been stored
at the Preset 2.
Note: You can store the Surround settings as
well as the Equalizer settings in the
Presets.
To Next Page
Loading...
