Alpine CDE-143EBT User Manual

18-EN
Option Menu Setting
You can quickly adjust the setting items relevant to the current SOURCE
by using Option Menu.
1 Press and hold ENTER/OPTION for at least 2 seconds
to activate the Option menu of the current source.
Note
• The option menu varies depending on the source.
2 Turn the Rotary encoder to select the desired setting
item, and then press ENTER.
3 Turn the Rotary encoder to change the setting, and then
press ENTER.
After the setting, the display will return to the current source
automatically.
 Setting item:
TUNER mode:
TUNER SET
*1
 VOL LV ADJ
*2
 MX SETTING
*3
CD mode (CDE-143EBT/CDE-143EBTTH only):
CD SET
*4
 VOL LV ADJ
*2
 MX SETTING
*3
MP3/WMA/AAC (Disc) mode (CDE-143EBT/CDE-143EBTTH only):
CD SET
*4
 VOL LV ADJ
*2
 MX SETTING
*3
MP3/WMA/AAC (USB) mode:
VOL LV ADJ
*2
 MX SETTING
*3
iPod mode:
APP DIRECT
*5
 iPod SET
*6
 VOL LV ADJ
*2
 MX SETTING
*3
AUX mode:
AUX SET
*7
 VOL LV ADJ
*2
 MX SETTING
*3
BT AUDIO mode:
BT SET
*8
 VOL LV ADJ
*2
 MX SETTING
*3
Phone mode (Non-calling mode):
PHONE SET
*9
 VOL LV ADJ
*10
Phone mode (Calling mode):
MIC GAIN
*11
 CALL SOUND
*11
 SPK SWITCH
*12
 VOICE
MUTE
*13
 CALL WAIT
*14
 END CALL
*15
 VOL LV ADJ
*10
*1 The setting items are the same as TUNER setting in SETUP
mode. For details, refer to “SETUP” on page 19.
*2 You can individually emphasise or weaken the volume level
of the current source to create your own tonal preference. The
setting values in Option mode and in SETUP mode are
linkage. Refer to “Setting the Source Volume Level” on
page 15.
*3 Refer to “Setting the MX Level” on page 16.
*4 PLAY MODE can be selected in this mode. For details, refer
to “Playing MP3/WMA/AAC Data (PLAY MODE)
(CDE-143EBT/CDE-143EBTTH only)” on page 19.
*5 Refer to “Setting the iPod Control” on page 28.
*6 The setting items are the same as iPod setting in SETUP
mode. For details, refer to “iPod/iPhone Setting” on page 20.
*7 AUX NAME can be selected in this mode. For details, refer to
“Setting the AUX NAME mode” on page 19.
*8 FW VERSION and FW UPDATE can be selected in this
mode. You can see the current firmware version about
BLUETOOTH by using this setting.
*9 CALL SOUND, CALLER ID, PB UPDATE, PB ORDER,
AUTO ANS, SPEAKER SL and FW VERSION can be
selected in this mode. For details about these settings, refer to
“BLUETOOTH SETUP” on page 21.
*10 The Hands free phone talk level, ring tone level and
microphone gain level can be adjusted by using this setting.
Changing the settings in the Option mode will also affect the
same settings in the SETUP menu. Refer to “Adjusting the
volume (VOL LV ADJ)” on page 22.
*11 Refer to “Setting the BLUETOOTH sound quality” on
page 22.
*12 While calling, the call sound can be switched between the
unit and mobile phone by using this setting.
This operation can also be done by pressing BAND. Refer to
“Call Switching Operation” on page 26.
*13 While calling, and the Voice Mute is activated, the
microphone input will mute instantly and “VOICE MUTE”
will blink. This operation can also be done by pressing .
Refer to “Muting the microphone input quickly (Voice Mute)”
on page 26.
*14 If there is a waiting call, select this item to display the caller’s
Name and waiting number (1 or 2). Press VIEW and the
display will switch.
*15 Select this item to hang up the call.
00ALPINE.book Page 18 Friday, November 16, 2012 4:10 PM

Alpine CDE-143EBT Specifications

General

Brand	Alpine
Model	CDE-143EBT
Category	Car Receiver
Language	English