Alpine DVA-5210 - DESCRIPTION(1)

DVA-5210
Descri
p
tion of IC Terminal
D70F3032BY : IC5001
No. Symbol I/O Terminal Description
1 AI-RS O RS (register selection) output terminal for AI-NET BUS-IC.
2 AI-RESET O RESET output terminal for AI-NET BUS-IC.
3 u-CTL O Power supply output control terminal for ACC+5V.
4 DVD-CS O CS (tip select) output terminal for DVD BE.
5 DVD-RESET O RESET output terminal for DVD BE.
6 OSD CS O CS (tip selection) output terminal for OSD IC.
7 OSD SIN O Data output terminal for OSD IC.
8 OSD SCLK O Serial clock output terminal for OSD IC.
9 EVDD - VDD connect terminal.
10 EVSS - GND connect terminal.
11 BUZZER O Buzzer control output terminal.
12 WATCH DOG O WATCH DOG circuit output terminal.
13 REMOCOM IN I Outside remote control data input terminal.
14 DVD-STB O Standby control output terminal for DVD BE.
15 DVD-DI I Data input signal terminal for DVD BE.
16 DVD-DO O Data output terminal for DVD BE.
17 DVD-ACK I Data effective / invalid input terminal for DVD BE..
18 OSD RES. O RESET output terminal for OSD IC.
19 AUDIO CONT O Power supply output control terminal for AUDIO.
20 ACT-IND O ACTION LED control output terminal.
21 VPP(NC) - No connect terminal.
22 NC - No connect terminal.
23 V-CONT O Power supply output control terminal for VIDEO.
24 FAN CONT(NC) - No connect terminal.
25 AI-NET/STD-A I AI-NET connection / stand-alone switching terminal.
26 SEL-1 O AI-NET AUDIO line switching output terminal.
27 V-MUTE OUT O MUTE output control terminal for VIDEO.
28 A-MUTE O MUTE output control terminal for AUDIO.
29 NC - No connect terminal.
30 P-CONT1 O Main power supply output control terminal for DVD BE.
31 P-CONT2 O Power supply output control terminal for DVD mechanisms.
32 P-CONT3 O 4V power supply output control signal terminal for DVD BE.
33 P-CONT4 O 2V power supply output control terminal for DVD BE.
34 RESET IN I u-COM RESET input terminal.
35 NC(PULL-DOWN) - Pull-down connect terminal.
36 NC - No connect terminal.
37 REGC - Power supply control terminal for u-COM.
38 XOUT - Crystal connection terminal for main frequency.
39 XIN - Crystal connection terminal for main frequency.
40 VSS - GND connect terminal.
41 VDD - VDD connect terminal.
42 NC - No connect terminal.
43 P-CONT5 O Power supply output control terminal for LED.
44 P-CONT6 O Digital power supply output control terminal for DVD BE.
45 MEDIA IND. O LED output control terminal for Media.
- 36 -
TO CONTENTS
TO SCHEMATIC