Connecting an Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H700, PXA-H900, etc.)
and TV Monitor
• Be sure to switch the head unit’s system switch before turning the power on.
•Also refer to the operating instructions of the other products in the system.
•To connect a rear monitor, connect to the front monitor’s RCA output (TV Tuner Box).
Please observe the following when using Fiber Optic Cable.
• Do not coil th Fiber Optic smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
The switched (ignition) power lead connection is not needed.
Digital Audio Processor
PXA-H700 etc
(Sold Separately)
Digital Input
Terminal (Optical)
(for DVD Player)
Digital Output
Terminal
(Optical)
Fiber Optic Cable
Ai-NET Cable
Ai-NET Connector
(Gray)
CD Changer
(Sold Separately)
DVD Player
DVA-5210
Only when connecting with rear monitor
Audio Output
Connector
RCA Extension
Cable
AUX Audio Input
Terminal (AUX1)
AUX Video Input
Terminal (AUX1)
Remote Control
Output Lead (AUX1)
(White/Brown)
Remote Control
Input Lead
(White/Brown)
Video Output
Connector
RCA Extension Cable
Monitor
TME-M790 etc
(Sold Separately)
AV-Interface Unit
TME-M790 etc
(Sold Separately)
Head Unit
with Ai-NET
(Sold Separately)
Ai-NET Cable
Ai-NET Input
Connector
System Switch
1
2
Ai-NET Input
Connector
Ai-NET Cable
Ai-NET Connector
(Black)
Ai-NET
Connector
When connecting a digital audio
processor using Ai-NET feature, place
this switch in the EQ/DIV position.
EQ/DIV
System Switch
DVA-5210
Setting of DVA-5210
Setting Item
System switch
Ai-NET setting
Setting
1 (Ai-NET)
AV Head unit available after
December 2003 (IVA-D300R, etc.)
FULL
2004 (IVA-D900R, etc.) or head unit.
TIME
The DVA-5210's system settings must be made after connections are completed. Before fixing the unit in place,
AV head unit available before January
refer to “ Setting the System Switch ” on OWNER'S MANUAL and “ Setting the Ai-NET ” on OWNER'S MANUAL.
To Next Page
Loading...
