Changing the information displayed on the screen
Your EZi-DAB-ONE can display different information while you are listening to a radio station.
1. Press .
2. Press and Select to choose 'Settings' > 'Display' > 'Information'.
3. Press and Select to choose a setting.
l To display the names of radio stations, choose 'Station name'.
l To display text that the radio station broadcasts, choose 'Scrolling text'. This setting is not recommended while
driving.
l To display the signal quality of radio stations, choose 'Signal quality'.
l To display the signal strength of radio stations, choose 'Signal strength'. The signal strength is displayed on a scale
from 0to 15bars. A marker on the scale shows the minimum number of bars required for good reception.
Changing the screen brightness
A light sensor on the controller automatically sets the screen brightness, but you can manually change it.
1. Press .
2. Press and Select to choose 'Settings' > 'Display' > 'Brightness' > 'Manual'.
3. Press and Select to choose a brightness level.
You can set the screen on the controller to dim after a certain length of time. To change the length of time, choose
'Settings' > 'Display' > 'Timeout'.
20
To Next Page
Loading...
