ALPINE ICS-X8 68-13530Z89-A (EN)
10-EN
Owner’s manual BLUETOOTH Setting, BLUETOOTH Operation
Hands-Free Phone Control
Hands-free calls are possible when using an HFP (Hands-Free Profile) compatible mobile phone with the ICS-X8.
How to connect to a BLUETOOTH
compatible device (Pairing)
1 Press the Home button.
2 Touch [Setup].
3 Touch [General Setup].
4 Touch [o] or [p] of “BLUETOOTH” to set to
“On.”
5 Touch [BLUETOOTH].
6 Touch [Set BLUETOOTH Device].
7 Touch [Search] of “No Device.”
The Device list displays up to 10 items.
8 Touch [Audio], [HFT] or [Both] of the device
you want to connect from the list.
Audio: Sets for use as an Audio device.
HFT: Sets for use as a Hands Free Device.
Both: Sets for use as both an Audio device and
Hands Free Device.
9 When the device registration is complete, a
message appears and the device returns to
normal mode.
The BLUETOOTH registration process differs depending
on the device version and SSP (Simple Secure Pairing). If
a 4 or 6 character Passcode appears on this device, enter
the Passcode using the BLUETOOTH compatible device.
If a 6 character Passkey appears on this device, make
sure the same passkey is displayed on the BLUETOOTH
compatible device and touch “Yes.”
Answering a Call
1 An incoming call triggers the ringtone and
an incoming call display.
2 Touch [ ] or press Media Control button
1.
The call starts.
Hanging up the Telephone
1 Touch [ ] or press Media Control
button 3.
The call finishes.
•
Inst
When
system,
(e.g. on
provide
X8 to t
circuit
Failure
the veh
The Di
when i
1 Be
op
int
2 Ins
an
ou
pe
0 - 3
•
•