117-EN
Visual EQ Setup Operation
1
Press <MENU>.
2
When the NAVIGATION menu is displayed, touch the
[AUDIO/VISUAL] tab.
Or, press <MENU> to switch the tab.
3
Touch [Visual setup].
The Visual setup screen is displayed.
• To set up a Visual source, proceed to step 4.
• To set up a Navigation/Audio source, proceed to step 6.
4
Touch [ ] or [ ] to change its setting.
Setting item: Visual EQ
Setting contents: Flat (Initial setting) / Night movie / Soft /
Sharp / Hi contrast
Flat: Initial Setting
Night movie: Suitable for movies in which dark scenes
frequently appear.
Soft: Suitable for CGs and animated films.
Sharp: Suitable for old movies where images are not
clearly shown.
Hi contrast: Suitable for recent movies.
• To make more detailed setting changes, proceed to step
5.
• To complete the setting, proceed to step 7.
5
Touch [Custom] to display the detailed setting
screen.
6
Touch [ ] or [ ] to change its setting.
Setting item: Bright, Contrast, Colour, Tint, Sharpness
Depending on the source, the available setting items
vary.
• Visual source: Bright, Contrast, Colour, Tint, Sharpness
• Navigation/Audio source: Bright, Contrast
7
Touch [ ].
The system returns to the previous screen.
• If you have changed Bright, Contrast, etc. in step 6, Visual EQ is
displayed as “Custom”.
• You can set up Visual EQ only for the current Visual source.
• For how to adjust the picture quality when connected to a rear
camera, see “Adjusting the picture quality of the Rear Camera
screen” (page 93).
Visual Setup
Downloaded from Caradio-Manual.com Manuals
To Next Page
Loading...
