ALPINE INE-W920R/INE-W928R QRG 68-21057Z30-A (EN)
6-EN
Owner’s manual User Registration
User Registration
You can register up to two users. Configure the User 1 and User 2 settings for each user.
1 Press the (My Favorites) button.
The My Favorites screen is displayed.
2 Touch [Start].
The user name input screen for the first user is
displayed.
Touching [Skip] registers the user name as
“USER 1” or “USER 2” and no BLUETOOTH device
is registered. In this case, the users will not be
switched automatically.
Touching [Cancel] or pressing the
(My
Favorites) button returns to the original screen
without registering a user.
3 Input the user name from the keypad and
touch [OK].
The BLUETOOTH Device Setup screen is displayed.
Touch [
] to edit the name.
4 Touch [Link], then touch [OK].
The BLUETOOTH Device List is displayed.
Touching [Do not Link] exits user registration
without registering a BLUETOOTH device.
•
•
•
•
5 Touch [Search].
The system starts searching for BLUETOOTH
devices.
When the search is completed, the BLUETOOTH
Device List is displayed.
Set the BLUETOOTH setting on the preregistered
BLUETOOTH device side to “ON.”
6 Touch a registered BLUETOOTH device and
touch [OK].
My Favorites screen for USER1 is displayed.
Register User 2
7 Press the (My Favorites) button.
The My Favorites screen is exited and the display
returns to the original screen.
8 Press and hold the (My Favorites) button
for at least 3 seconds.
The My Favorites user guide is displayed. Repeat
steps 2 through 6 to register USER 2.
•
e
Rad
MP3
Displays th
Finds the b
the current
previous fi
second aft
e
starts/Fast-
touched fo
seconds
Finds begi
n
Finds begin
Current son
Elapsed tim
Decreases f
Preset butt
Displays the
short touch.
Touch for at
memorise t
h
preset statio
Memorises
Changes tu
SEEK mode
Traffic Info
Changes op
Pause and
PRIORITY
N
To Next Page
Loading...
