AdJu$tln9;
Brightness·
Adju.tlng rrictureQuality
setting Item: BRIGHT
Setting content:
-15 - +15
You
can adjust the brightness between MIN (-15) and
MAX
(+15). When it reaches the minimum or maximum point, the
display shows "MIN" or "MAX" respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car's interior lighting as
long as AUTO is set
in
"Setting the Brightness
of
the Backlighting"
(page 40).
·AdJUstlr1g!~nt()f
Plctu~e
Setting item: TINT
Setting content: G15 - R15
Adjust the color from G15
to
R15.
"G
MAX" or
"R
MAX" is
displayed at the maximum of each color.
• Tint adjustment can be made only in the navigation, DVD, Video
CD,
AUX modes.
• Tint adjustment cannot be made
if
a Navigation system with the RGB
feature is connected.
• When the picture from the external input is set
to
PAL,
you cannot
adjust the
TINT.
.
~ciJustlng;Jfuag.
Contrast;'
setting item: CONTRAST
Setting content:
-15 to +15
Adjustment of contrast
is
done
in
the range of -15 to +
15.
"HIGH"
and "LOW" appear
as
the maximum and minimum values
specified.
• When any NIGHT
M.
to CONTRAST setting item is selected, image
contrast is automatically adjusted according to the car's interior
brightness
if
AUTO is set in "Setting the Brighmess
of
the
Backlighting" (page 40).
42-EN
Setting item: SHARP
Setting content:
·15
to +
15
Adjustment of picture quality is done
in
the range of -15 to +
15.
• Picture quality adjustment can be made only in the navigation, DVD,
Video CD,
AUX
modes.
• Picture quality adjustment cannot be made
if
a navigation system
with the RGBfeature is connected.
Setting item: COLOR
Setting content:
·15
- +15
You
can adjust the color between MIN (-15) and MAX (+15).
When
it
reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.
• Color adjustment can be made only in the navigation, DVD, Video
CD,
AUX
modes.
• Color adjustment cannot be made
if
a Navigation system with the
RGBfeature is connected.
You
can store the settings made for "Adjusting Image Brightness. Tint.
Depth. picture Quality and Contrast."
SettIng item: USER MEMORY
Setting content: P-1 / P-2
After completing "Adjusting Brightness, Tint, Depth,
Picture Quality, and Contrast" (page 42), touch
[~
] or
[~]
of
USER
MEMORY and then select preset No. "P-1"
or "P·2"
to
which the settings are to be stored.
2 After selecting a preset No., touch [MEMORY).
The adjusted VISUAL
EQ
mode is stored
by
the above
operations.
•
You
can recall the VISUAL EQ mode stored here from P-I
or
P-2
of
"Selecting the VISUAL EQ Mode (Maker's setting)" (page 41).
To Next Page
Loading...
