Setup
Before
Using
AboUl
Bluetooth
Bluetooth is a wireless technology allowing communication
between a mobile device
or
personal computer over short
distances. This enables a hands-free call or data transmission
between Bluetooth compatible devices. Bluetooth
transmission is available
in
the unlicensed 2.4 GHz spectrum
if
the distance between devices
is
within
10
meters. For
details, refer to the Bluetooth Homepage
(http://www.bluetooth.com!).
• Depending on the Bluetooth version, a Bluetooth
compatible device may not be able to communicate with
this adapter.
• Properfunction
of
this adapter with all Bluetooth
compatible devices
is not guaranteed.
For
handling
of
the
BT
compatible device, consult yourALPINE dealer or
ALPINE website.
• Depending on the surroundings, Bluetooth wireless
connection may be unstable.
• When you place a call,
or
perform setup operations, be
sure to stop your car in a safe place.
• For details on the control (selection,
enter,
cancel) from the
connected unit, refer
to
the Owner's Manual
of
the
respective unit.
• Depending on the connected Bluetooth compatible
device(s), the function may differ. Also refer to the Owner's
Manual
of
the connected device(s).
Before
Using
Hands-Free
Function
Before using the hands-free phone/audio function, the
following settings need to be made.
1 Be sure to set "INT MUTE" (in the setup
function of the connected CD Head Unit or
Digital Media Receiver) to OFF.
•
To
enable sound pass-through
of
the Bluetooth compatible
device, make sure that
INT
MUTE is turned OFF (Initial
setting on the unit
is OFF).
2 Set "BLUETOOTH IN" or "BT IN" to
ADAPTER*. (Refer to the Owner's Manual of
the connected units.)
3 Turn the ignition key off (ACC OFF) and on
again (ACC ON).
• Before using a hands-free phone, it must be paired with the
adapter. Refer to "Bluetooth SETUP" (pages 4-5).
*
If
"BLUETOOTH
IN"
or
"BT
IN"
setting is turned OFF at
any time, adapter communication
is canceled.
To
resume
communication: repeat Steps I through
3 above.
How
to
connect
to
a
Bluetooth
compatible
device
(Pairing)
For details on the control from a Bluetooth compatible I
device, refer to the Owner's Manual
of
the Bluetooth
compatible device.
1 Set a Bluetooth connection from a Bluetooth
compatible device.
2 The PIN code ("0000") is displayed on the
connected unit.
• The PIN code is fixed as "0000".
3 Input the PIN code ("0000") in a Bluetooth
compatible device.
4 If the connected unit is successfully
connected to a Bluetooth compatible device,
a paired device name is displayed on the unit,
and then the unit returns to normal mode.
• The registration number 5 is the guest mode. Content that
is registered as the guest mode is deleted when you set
ignition from
Ace
to
OFF.
If
all the 5 positions (including
guest mode) have been registered, you cannot register the
6th device.
To
register another device, you need to delete
one
of
the device from positionI to 5first.
•
If
a Bluetooth compatible device is successfully connected,
the next time when the ignition key
of
the car is turned to
on,
the unit will automatically connect to the previously
connected device. However, the connection mayfail.
If
the
auto connection fails, try the connection manually.
• Set "Setting the Search Mode" (page
4) to
ON
to
enable
the KCE-400BT to recognize a mobile phone. For mobile
phone passkey (passcode) input operation, refer to the
mobile's Owner's Manual.
3.EN
To Next Page
Loading...