Bluetooth
SETUP
Bluetooth
Setup
Operation
The following steps I to 5 are common to the various
Bluetooth functions. For details, refer to each individual
function.
• When placing
or
receiving a call
or
streaming audio from
the Bluetooth device, Bluetooth Setup operation cannot be
performed.
• Refer
to
the Owner's Manual
of
the CD Head Unit or
Digital Media Receiver, and set "BLUETOOTH IN"
or
"BT
IN" to ADAPTER, and then perform Bluetooth
SETUP operation.
1 Press and hold
SETUP
for at least 2
seconds.
2 Turn the
Rotary
encoder
or the Double
Action
encoder
to select the desired
setting items and press
ENT.
Setting items:
BT
IN H PAIR
DEVICE*'
H VISIBLE MODE*' H
AUTO ANSWER*' H CLEAR DEVICE*' H
SERVICE NAME*J/*2 H
MIC
INPUT*'
H
SPEAKER
SELECT*'
H
FW
VERSION*'
H
FWUPDATE*'
*'
When "BLUETOOTH IN"
or
"BT
IN"
is
set
to
ADAPTER, the above items are displayed.
*2
Only
for
CDA-105 Series.
3 Turn the
Rotary
encoder
or
the Double
Action
encoder
to change the settings and
pressENT.
4 Press and hold
ESC
(or
SETUP)
or
~
for at
least 2 seconds.
The
SETUP
mode
is
canceled.
setting
the
.BluetOothpevice
Select one
of
5 connected Bluetooth compatible devices that
you previously registered (the fifth registered by guest
mode*).
Setting item: PAIR DEVICE
Turn the
Rotary
encoder
or the Double
Action
encoder
to select a Bluetooth
compatible device you want to use (you want to
change connection), and then press
ENT.
•
If
the connection
is
successfully changed, "CONNECTED"
or "CONNECT" is displayedfor 2 seconds, and then the
display returns to the SETUP screen.
•
If
you input the wrong passcode
or
communicationsfail,
"FAILED"
is
displayed.
4.EN
• When a mobile phone
is
paired with the unit, up to 1,000
telephone numbers will automatically be obtained
in
the
telephone book (PHONE BOOK). Also, when the mobile
phone
is
reconnected, new information on the mobile
phone will automatically be updated.
• Depending on the connected mobile phone, the telephone
book (PHONE BOOK) may not be automatically obtained.
If
the telephone book cannot be automatically obtained, it
can be manually transferred to the adapter by referring to
the Owner's Manual
of
the mobile phone.
•
If
you want to connect another Bluetooth compatible
device, after disconnecting the current Bluetooth
compatible device, connect the Bluetooth compatible
device you want to change
to.
The PIN code is fixed as "0000".
* Guest mode:
Use this mode
for
a temporary pairing. Registration (in
guest mode)
is
canceled once the ignition key goesfrom
ACC
to off.
setting
the
Search
U()de
You
can set whether the KCE-400BT can be recognized
or
not from a Bluetooth compatible device. Normally set this to
ON.
Setting item: VISIBLE
MODE
ON: Enable recognition of the KCE-400BT from the
Bluetooth compatible device.
OFF: Disable recognition of the KCE-400BT from the
Bluetooth compatible device.
• Depending on the mobile phone, it may be necessary to
input a passcode.
For
inputting the mobile phone's
passcode, refer to the mobile phone's Owner's Manual.
When a call is received, you can set whether
to
answer
it
automatically
or
not.
Setting item: AUTO
ANSWER
ON: When a call
is
received,
it
is
answered
automatically after about
5 seconds.
OFF: When a call
is
received,
it
is
not answered
automatically. Press
../
or
\.. to receive the
call.
•
If
the received call setting on the mobile phone
is
on, the
call will be answered automatically even though this
setting
is
set
to
OFF.
To Next Page
Loading...