Hands-Free
Phone
Control
About
the
Hands-Free
Phone
Hands-free calls are possible when using a HSP (Head Set
Profile) and HFP (Hands-Free Profile) compatible mobile
phone with a ALPINE Bluetooth compatible CD Head Unit
or
Digital Media Receiver.
• Avoid performing a hands-free call in heavy traffic or on
narrow
or
winding streets.
• Close the windows while calling to reduce background
noise.
•
If
both calling parties are using hands-free devices,
or
the
call
is
made
in
a noisy location, difficulty hearing the other
person's voice is normal.
• Depending on telephone line conditions or certain mobile
devices used, voices may sound unnatural.
• When using a microphone, speak as directly as you can
into the microphone
to
pick up the best sound quality.
• Certain mobile phonefeatures are dependent on the
capabilities
and
settings
of
your service provider's
network. Additionally, certain features may not be
activated by your service provider, and/or the provider's
network settings may limit the feature's functionality.
Always contact your service provider about feature
availability andfunctionality.
Allfeatures, functionality, and other product specifications,
as well as the information contained
in
the Owner's
Manual are based upon the latest available information
and are believed
to
be accurate at the time
of
printing.
Alpine reserves the right to change
or
modify any
information
or
specifications without notice
or
obligation.
6.EN
Answering
a
Call
Incoming calls are announced by the received call ring tone
and a displayed message (Caller namelPHONE No.).
Digital Media Receiver:
Press \....
CD Head Unit:
Press ..,I.
• When "Answering Calls Automatically" (page
4)
is set to
ON,
you can receive a call automatically.
• While calling, the source sound on the unit
is
muted.
Hanging
up
the
Telephone
Digital Media Receiver:
Press \....
CD Head Unit:
Press ..,I.
Voice
Dial
Operation
You
can call the telephone by performing voice operation.
1 Press and hold
\...
or ..,I for at least 2 seconds.
The speak mode
is
activated, and "SPEAK"
is
displayed.
2 Say the telephone number, name you want to
call into the microphone.
Pressing and holding
\...
or ..,I for at least 2
seconds will cancel the voice dial mode.
•
If
the voice dial fails, the unit will return to normal mode
in
30 seconds.
•
You
can perform this operation only when a voice dial
compatible mobile phone is connected.
If
the mobile phone
is
not compatible with the voice dial, "NO SUPPORT" is
displayed
for
2 seconds.
• The Voice Dialfunction performance depends on the
recognition range
of
the mobile phone
and
mounting
location
of
the microphone. Note when the microphone is
mounted.
• This operation cannot be performed when the current
source
is Bluetooth AUDIO, and "NO SUPPORT" is
displayed
for
2 seconds.
•
If
a called person that you say
is
notfound, "NO CALL" is
displayed
for
2 seconds.
•
Voice
dial operation depends on the function
of
the mobile
phone. For details, refer
to
the Owner's Manual
of
the
mobile phone.
•
If
you place a call via voice dial, you cannot display a
phone number or name.
To Next Page
Loading...