Alpine MAZ254-UK - Assembling & Using Your Product

4
ASSEMBLING & USING YOUR PRODUCT
Unpack all components carefully. Check the packaging to ensure all of
the parts have been removed.
*Some splashing may occur when the fountain is in use.
1. Place the Fountain Base on a smooth and level surface. Allow
enough space to access the pump. NOTE: Allow enough space
to access the pump during installation.
2. Remove the pump from its packaging and adjust the ow control
to the lowest setting to avoid splashing until the fountain is
completely assembled.
Alpine Quick Tip #1
Turn to the Right / Clockwise
to turn down the water ow.
Turn the adjuster to the Left /
Counter-Clockwise to turn up
the water ow.