Alpine NVE-M300P - Trip Information Screen

NVE-M300P Navigation Module Owner’s Manual
50
Name Description Function
Time Left
Shows the time needed to reach the final
destination of the route
based on information
available for the remaining segments of the
route.
The calculation cannot take into account
traffic jams and other possible delays.
n/a
Distance Left
Shows the distance you need to travel on the
route before reaching your final destination.
n/a
Method
This field shows how the route was calculated.
It
either displays the Route Calculation Method
or
the Vehicle field from the
Route Planning
options.
If you have chosen Car, Taxi or Bus
, the type of
the route (Fast, Short, Easy or Economical
) will
be displayed here; if you have selected
Emergency, only
this information will be
displayed here.
n/a
Warning icons
In these square fields graphical symbol
s are
displayed in case warnings are attached to the
planned route.
These are warnings, so icons
always show information for the whole route
,
even if the data fields display values from your
current position to a waypoint only.
Tap any of the icons for an
explanation.
Opens the Route Planning
options screen from the
Settings menu.
Appears only if at least one waypoint exists. Deletes the next waypoint
from the route.
Appears only if there are no waypoints in the
route.
Deletes the active route.
8.1.5 Trip Information screen
The Trip Information screen has both route and travel data you might need during your journey. It can
be opened directly from the Map screen by tapping the Trip Data field (
).
The fields on this screen are continuously updated while you keep the screen open.
All route data fields contain information about reaching your final destination.
If you want to change the content of the three data fields on the Map screen, tap
.
You have the following data and functions on this screen: