To Next PageTo Next Page
Need help?Do you have a question about the Alpine PDR-V75 and is the answer not in the manual?
General| Amplifier class | D |
|---|---|
| High pass filter | Yes |
| Number of amplifier channels | 5 channels |
| RMS power output per channel (2 Ohm) | 100 W |
| RMS power output per channel (4 Ohm) | 75 W |
| Maximum power output per channel (2 Ohm) | 350 W |
| Maximum power output per channel (4 Ohm) | 250 W |
| Audio RCA inputs | 2 |
| Product color | Black |
Weight and Dimensions| Depth | 165 mm |
|---|---|
| Width | 270 mm |
| Height | 50.8 mm |
Read the manual carefully before using the system for safe and effective operation.
Avoid functions that distract from driving and maintain safe listening volume levels.
Follow correct procedures for installation, wiring, and fuse usage to prevent hazards.
Steps for removing cover, preparing mounting holes, and connecting ground lead.
Details on connecting speaker outputs and RCA input jacks for audio signals.
Information on connecting the power supply terminal and fuse requirements.
Guides for connecting the remote turn-on lead and optional bass control.
Guidelines for connecting power supply wires, including fuse and wire gauge recommendations.
Specifies required wire sizes for battery, ground, remote turn-on, and speaker leads.
Details on connecting the remote turn-on lead, including alternative methods and switch usage.
Explanation of crossover mode, frequency adjustment, and input gain controls.
Settings for input channel selection and the subsonic filter for low frequencies.
Details on adding bass boost up to +12 dB for tuning bass response.
Explanation of indicator colors (blue, red) and their meaning for normal, high temp, or abnormal states.
Diagram showing typical connections for a 4 speaker + 1 subwoofer system with 5-channel input.
Diagram illustrating connections for a 4 speaker + 1 subwoofer system using 4-channel input.
Diagram illustrating connections for a 4 speaker + 1 subwoofer system using 2-channel input.
Important notes on bridging an amplifier for optimal output, including proper connection diagrams.
Detailed specifications including power output, THD+N, S/N ratio, frequency response, and damping factor.
Specifications for input select, sensitivity, crossover, equalizer, remote level, impedance, dimensions, and weight.
Details what the warranty covers, what it does not cover, and how to obtain service.
Explains limitations on implied warranties, liability, and state/provincial law relations.
