Alpine PKG-2000P - Monitor Setup and Picture Adjustments; Adjusting Picture; Visual EQ Operation; Adjusting Brightness

18-EN
Resetting the Picture Adjustment
2 Press ▲ or ▼ and select RESET.
3 Press or
t
o reset the picture adjustments.
• If you do not press or within 6 seconds, OSD disappears
and the previous adjustments will not be reset.
Setting Audio & Screen
Each source has different menu. Depending on the selection of source,
setting menu changes.
• Each source can be adjustable individually.
• Adjusting should be made within 6 seconds, otherwise OSD
(On Screen Display) will be automatically turned off.
1 Press and hold SELECT for at least 2 seconds to
show the SETUP menu on Front Control Keys. Or
Press SETUP button on Remote Control.
SELECT
Front Control Keys
Remote Control
2 Press SELECT/SETUP to switch to
AUDIO&SCREEN setting menu from PICTURE
setting menu. To change each item, press ▲ or ▼
.
Adjusting the Tint
2 Press ▲ or ▼ and select TINT.
3 Press or to adjust the tint. Tint tone can be
adjusted from G15 (G MAX) to R15 (R MAX).
4 Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting the Contrast
2 Press ▲ or ▼ and select CONTRAST.
3 Press or to adjust the contrast. Contrast can
be adjusted from –15 (LOW) to +15 (HIGH).
4 Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting the Sharpness
2 Press ▲ or ▼ and select SHARPNESS.
3 Press or to adjust the screen quality. Screen
quality can be adjusted from -15 (SOFT) to +15
(HARD).
4 Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
SETUP
Book_PKG-2000P.indb 18Book_PKG-2000P.indb 18 4/8/06 2:55:09 AM4/8/06 2:55:09 AM