24
PARAmETRIC EQUALIZER
3. Use the q or p buttons to choose between PRESET 1, PRESET 2, CUSTOM EQ
AUX, and CUSTOM EQ HU. PRESET 1 refers to the Primary Mic position. PRESET
2 refers to the Secondary position. In this example CUSTOM EQ H/U is selected.
4. Press u to show the EQ bands.
5. In this example the BASS will be adjusted. Adjusting the MID or TREB is very simil-
iar. Substitute "MID" or "TREB" for "BASS" and perform the same procedure men-
tioned below for "BASS."
OR
To Next Page
Loading...
