29
The system's crossovers are set by the PXE-H660 during its automatic setup process. The
PXE-H660 also allows custom cut-off points for the high-pass and low-pass lters of the
Front and Rear speakers and the Subwoofer. This is especially useful when the factory
speakers have been upgraded to handle a much wider audio bandwidth. It can also be used
to reduce the bandwidth on the OEM speakers for less distortion.
Crossover
1. Press MODE twice to enter Custom Tuning mode.
\\
2. Navigate to the right with the u button.
CROSSOvER SETTINGS
To Next Page
Loading...
