30
3. With "PRESET 1" in the display, use the q or p buttons to choose the MIC posi-
tion to modify. PRESET 1 refers to the Primary Mic position. PRESET 2 refers to the
Secondary position. Please note that CUSTOM EQ AUX and CUSTOM EQ HU do
not offer crossover menus. Choose either PRESET 1 or PRESET 2. In this example
PRESET 1 is selected.
4. Upon deciding which MIC position to select, use the u button to move to the next se-
lection mode. In this menu CROSSOVER or TIME DELAY can be selected by using
the q or p buttons. For this example, the CROSSOVER settings will be used. Press
the u button.
CROSSOvER SETTINGS
OR
To Next Page
Loading...
