EasyManua.ls Logo

Alpine TDA-7562R - Specifications

Alpine TDA-7562R
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
78
English
Specifications
FM TUNER SECTION
Tuning Range ............................................................. 87.5 – 108.0 MHz
Mono Usable Sensitivity ................................................................ 0.7 µV
50 dB Quieting Sensitivity.............................................................. 1.1 µV
Alternate Channel Selectivity......................................................... 80 dB
Signal-to-Noise Ratio ..................................................................... 65 dB
Stereo Separation .......................................................................... 35 dB
MW TUNER SECTION
Tuning Range ............................................................... 531 – 1,602 kHz
Sensitivity (IEC Standard) ................................................ 25.1 µV/28 dB
LW TUNER SECTION
Tuning Range .................................................................. 153 – 281 kHz
Sensitivity (IEC Standard) ................................................ 31.6 µV/30 dB
TAPE PLAYER SECTION
Tape Speed .............................................. 1-7/8 ips (4.8 cm/sec) ±0.7%
Wow & Flutter ................................................................... 0.06% WRMS
Signal-to-Noise Ratio
With Dolby B-Type NR ............................................................... 68 dB
With Dolby C-Type NR (TDA-7562R only) ................................ 75 dB
Without Dolby NR....................................................................... 60 dB
Frequency Response
With Alpine Test Tape................................................... 30–20,000 Hz
REMOTE CONTROL (TDA-7562R only)
Battery Type ...................................................... "AAA" sized dry battery
Battery Quantity .................................................................................... 2
Dimensions (W × H × D)
....................................56mm (2-1/4") × 14mm (9/16") × 105mm (4-1/8")
Weight (without battery)...................................................... 50 g (1.8 oz)
GENERAL
Power Requirement ............................... 14.4 V DC (11–16 V allowable)
Maximum Power Output* ................................................................ 40 W × 4
Maximum Pre-Output Voltage ........................................... 2 V/10k ohms
Bass .............................................................................. ±15 dB at 30 Hz
Treble ...........................................................................±10 dB at 10 kHz
Weight ........................................................................ 1.4 kg (3 lbs. 1 oz)
CHASSIS SIZE
Width ....................................................................................178 mm (7")
Height.....................................................................................50 mm (2")
Depth ...................................................................................152 mm (6")
NOSEPIECE SIZE
Width .............................................................................170 mm (6–3/4")
Height.......................................................................... 46 mm (1-13/16")
Depth ..............................................................................20 mm (25/32")
Note: Due to continuous product improvement,
specifications and design are subject to
change without notice.
* Under maximum operating voltage and
input signal, into 4 ohms.

Table of Contents

Related product manuals