We are not responsible for damage or malfunction of speakers caused by using the crossover outside the recommended value.
Crossover Setup
1 In the Normal mode, press and hold successively for at least 2 seconds.
2 Turn the Rotary encoder to select active 3-way mode or active 2-way mode.
3 Press to determine the selected content by following the screen prompts.
When the setting finishes, the system will restart automatically.
About active crossover mode
Frequency range is divided between highs for front/rear speakers and lows for the Subwoofer.
Active 2-way mode
Frequency range is divided between highs/mediums for front speakers and lows for low range speakers.
Active 3-way mode
To Next Page
Loading...
