Alpine UTX-A09 - iPod;iPhone Content Search; Searching for Desired Songs; Troubleshooting Common Issues

Pressing again will resume playback.
Note
• An episode may have several chapters. The chapter can be changed by pressing or .
Searching for a desired Song
An iPod/iPhone can contain many songs. This unit uses multiple methods to simplify the process of searching desired content.
As shown below, each music category has its own individual hierarchy. Select a music category from the table below to narrow the scope of
search.
Hierarchy 1
Hierarchy 2
Hierarchy 3
Hierarchy 4
Playlist
Song
---
---
Artist
Album
Song
---
Album
Song
---
---
Song
---
---
---
Genre
Artist
Album
Song
Composer
Album
Song
---
Audiobook
---
---
---
Podcast
Episode
---
---
iTunes Radio
---
---
---
For example:
Searching by Artist name.
The following example explains how an Artist search is performed. Another search mode can be used for the same operation, though the
hierarchy differs.
1 Press the Rotary encoder to activate the search selection mode.
2 Turn the Rotary encoder to select the Artist search mode, and then press the Rotary encoder.
Playlist Artist Album Song Genre Composer Audiobook Podcast iTunes Radio
3 Turn the Rotary encoder to select the desired Artist, and then press the Rotary encoder.
4 Turn the Rotary encoder to select the desired Album, and then press the Rotary encoder.
5 Turn the Rotary encoder to select the desired Song, and then press the Rotary encoder.
The selected song is played back.
Note
• In the search mode, pressing will return to the previous mode.
Information
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.