Output of this unit:
Front output
Rear output
SUB-W output
Note
• You cannot adjust the front/rear output balance when set to active 3-way mode.
Applying Alpine TuneIt App
This unit’s sound tuning is programmable from a connected Smartphone. It is also possible to download specific parameters for certain vehicles
from Alpine TuneIt database stored in the Cloud. Using the Alpine TuneIt App, customized parameters can also be uploaded for others to use.
The installed Alpine TuneIt App should be launched on the Smartphone before connection to the head unit.
About downloading Alpine TuneIt App, please consult your Alpine dealer.
Before these operations, set TuneIt Connecting Device to USB or Bluetooth depending on the connected Smartphone. For details, see “Alpine
TuneIt Connecting Device”.
Note
• The application programme and related specifications and data may be deleted or terminated without notice.
• Some Alpine TuneIt App functions may not be available if the Smartphone is not in a service area or receives no signal.
Adjusting the sound via the Smartphone
After setting the above procedure, you can adjust the unit’s sound function on the Smartphone.
1 Make sure the unit is powered on.
2 Launch the Alpine TuneIt App on the Smartphone. Adjust the unit’s sound accordingly on the Smartphone.
Note
• The volume level and EQ PRESETS cannot be adjusted via the Smartphone.
• The setting cannot be done on both the Smartphone and this unit at the same time.
• When the unit is powered off or during a call, sound setting cannot be done via the Smartphone.
• This function may not be available depending on the paired Smartphone.
• Please obey all local traffic laws while using this function.
To Next Page
Loading...
