• The USB device encounters abnormal current.
– You can solve the problem by turning ACC off/on.
• A USB device not supported by this unit is connected.
– Connect a USB device supported by this unit.
• An iPod/iPhone not supported by this unit is connected to any USB terminal.
– Connect a supported iPod/iPhone to the rear USB terminal of this unit only.
• The USB/MTP device gives no response.
– Remove the USB/MTP and plug in again.
• This indication appears when a USB hub is connected.
– Do not connect a hub to the unit.
• No USB Memory/MTP is connected.
– Make sure the USB Memory/MTP is correctly connected, and the cable is not bent excessively.
• No song (file) is stored in the USB Memory/MTP.
– Connect the USB Memory in which songs (files) are stored.
• A file not supported by this unit is used.
– Use the files supported by this unit.
• A copy-protected WMA file was played back.
To Next Page
Loading...
