Alpine WCT726 - User Manual

WCT726
Tiering Pots Fountain
Limited Warranty Information
Thank you for choosing an Alpine product! We aim to please with our wide range of products
including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed
from the highest quality materials. In the event that we have not achieved our usual standard of
excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of
purchase, with the purchase date clearly indicated, must be provided. Photos of defective
merchandise will also be required to help distinguish the actual cause of the defect. Please read
below for a detailed description of warranty coverage.
 Water Damage
Alpine products are not manufactured to withstand extreme temperatures. Improper
storage that allows water to freeze within a product may cause damage and is considered
negligence and will, therefore not be covered under this warranty. The use of “hard water”
and/or caustic cleaners can affect the paint or other finishes. Failure to keep the unit clean,
and use of such additives/cleaners, will also void the warranty. Please note: for fountains,
it is normal for some splashing to occur and protecting the immediate surfaces is not the
responsibility of Alpine Corporation
 Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched up
using standard paint. The paint is designed to protect the entire finish against breakdown
of color. As with any product, all finishes with time will gradually fade and discolor. The
warranty will only cover against severe or complete fading within the first year from date of
purchase with the above exclusion.
 Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom you
purchased the product. If that is not an option, you can contactAlpine Corporation at
www.alpine4u.com. When contacting Alpine Corporation, you must be prepared to
show proof of purchase, provide photographs and any other information needed to
validate your claim. This maybe necessary to distinguish between a partial or complete
replacement of a defective product. The warranty does not cover any items with multiple
parts; the warranty will ONLY cover the individual component of the unit/item that may be
defective. Replacement parts can be made available to a consumer through the original
selling party, or an approved parts retailer. If this is not an option, contact our customer
service department.
 Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to
1. Damages caused in Transit
2. Inadequate care and/or neglect
3. Environmental and/or natural elements
4. Immersion in water, unless specified
5. Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper
installation and/or modifications have occurred. This includes any and/or all defects arising out of
freezing water damage, hard water damage, failure to keep the unit clean and free of harmful
additives such as bleach, chlorine, etc…. which affects the paint and/or parts. This warranty also
does not cover any additional charges or installation, removal, disposal and/or shipping costs or
consequential damage associated with any warranty claim

Summary

Limited Warranty Information

Warranty Coverage and Exclusions

Details on what is covered, including exclusions for water damage, paint, and other factors.

Warranty Claim Procedure

Steps to follow for claims, including required documentation like proof of purchase.

Product Assembly and Usage

Assembly Instructions

Guidance on connecting components, filling with water, and powering the unit.

Pump Troubleshooting and Care

Addresses pump issues, maintenance, and safe operating practices.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document describes the Alpine WCT726 Tiering Pots Fountain, a decorative water feature designed for outdoor use.

Function Description

The Alpine WCT726 Tiering Pots Fountain is a self-contained water feature that circulates water through a series of tiered pots, creating a soothing visual and auditory effect. It is designed to enhance outdoor spaces such as gardens, patios, and yards. The fountain operates by pumping water from a basin through tubing to the top-most pot, from which it cascades down through the subsequent pots and back into the basin, creating a continuous flow.

Important Technical Specifications

The document does not explicitly list detailed technical specifications such as dimensions, weight, material composition, or pump flow rate (GPH). However, it implies the following:

• Power Source: The fountain operates using a transformer that plugs into a local power supply.
• Water Type: The manufacturer recommends using distilled water to prevent scale build-up.
• Water Temperature: It should not be operated with water above 90°F (30°C).
• Pump: The fountain includes an electric pump responsible for circulating the water. The pump has a removable front cover and plate to access the impeller area.
• Components: The main components include the fountain structure itself (tiered pots), a water pump, and vinyl tubing to connect the pump to the fountain.

Usage Features

• Assembly:
  • Connect the vinyl tubing to the water pump.
  • Adjust the flow control on the pump to the lowest setting initially to minimize splashing during assembly.
  • Gently pour water into the fountain, ensuring the pump is completely submerged and water flows smoothly.
  • Plug the transformer into a local power supply, ensuring no water is around the transformer and the power source is in a dry place.
  • Note: It may take up to 5 minutes for the pump to expel air and for water to flow properly during the first operation.
• Water Management:
  • Ensure the pump is always completely submerged in water to prevent it from "spewing" or running dry.
  • Regularly check water levels and replenish as needed.
  • The manufacturer recommends using distilled water to prevent scale build-up.
• Operation Environment:
  • The fountain is not designed to withstand extreme temperatures. Improper storage that allows water to freeze within the product may cause damage.
  • The power source (transformer) must always be kept in a dry place.
  • Do not operate with water above 90°F (30°C).
• Troubleshooting:
  • Pump failure: Check the circuit breaker/outlet, pump discharge/tubing for kinks/obstructions, and the rotor for jams or breaks.
  • Pump "spewing": Check if the water level is sufficient to completely submerge the pump.
  • Abnormal loud noises from pump: Disconnect power, remove the front cover/plate, carefully remove the impeller/rotor assembly, clean it with clean water, and check for breakage.

Maintenance Features

• Cleaning:
  • Always unplug the pump from the electrical outlet before cleaning or handling.
  • Use only clean water; do not place the fountain or parts in other liquids.
  • Periodically change the water and clean the pump to prevent micro-organism growth.
  • The manufacturer recommends using Alpine's all-natural cleansing formula (PPL100 for fountains up to 7 liters, PPL102 for fountains over 7 liters) to eliminate foam, lime scale, calcium buildup, fight mineral deposits, prevent staining, remove organic contaminants, treat discolored water, and prevent pump damage from hard water.
  • Clean the impeller/rotor assembly and the pump cavity with clean water.
  • The paint and color may naturally erode over time and can be touched up with standard paint.
  • Failure to keep the unit clean and use of recommended additives/cleaners will void the warranty.
• Storage:
  • Disconnect and store the unit in a dry place when not in use for an extended period.
  • Improper storage that allows water to freeze within the product is considered negligence and will void the warranty.
• General Care:
  • Do not lift, carry, or pull the pump by its power cord.
  • Do not exceed the maximum voltage and wattage on the transformer.
  • NEVER let the pump run dry.
• Warranty Information:
  • Coverage: The limited warranty covers repair or replacement, at Alpine's discretion, within the warranty period. A valid proof of purchase with the date clearly indicated is required, along with photos of defective merchandise. The warranty covers severe or complete fading within the first year (excluding natural erosion). It only covers the individual component that is defective, not items with multiple parts.
  • Voided Warranty: The warranty is void if the product is damaged by accident, misuse, negligence, improper installation, or modifications. This includes freezing water damage, hard water damage, failure to keep the unit clean, and the use of harmful additives (e.g., bleach, chlorine). The warranty does not cover additional charges for installation, removal, disposal, shipping, or consequential damage.
  • Exclusions: Damages caused in transit, inadequate care/neglect, environmental/natural elements, immersion in water (unless specified), and improper installation/storage/maintenance are not covered.
  • Claim Procedure: Contact the retailer where the product was purchased. If that's not possible, contact Alpine Corporation at www.alpine4u.com. Be prepared to show proof of purchase, photographs, and other information to validate the claim.

Alpine WCT726 Specifications