Alpine X009E - Navigate to a Location Stored in a Picture

63
4. (optional) If necessary, tap then
and enter the coordinate in UTM format.
5. When finished, tap .
6. After a short summary of the route parameters, the map appears
showing the entire route. The route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
3.1.8 Navigate to a location stored in a picture
You can also set the location stored in a picture as your destination. Do as
follows:
Alpine_X009E_B5.pdf 63 5/9/2014 14:22:25