Alpine X009E - Setting a New Starting Position for the Route

68
 Tap to plan a new route to the newly selected location. The
previous destination and waypoint(s) are deleted.
 Tap to add the newly selected location as an intermediate
destination to your route. The other destinations of the route remain
intact. Note: the new waypoint is placed among destinations to keep
the route optimal. To decide where a waypoint to appear, use the
Edit Route feature.
 Tap to append the newly selected destination at the end of
the route. The other destinations of the route remain intact. The
previous final destination is now the last waypoint.
3.4.2 Setting a new starting position for the route
For normal navigation, all routes are planned from the current position. In
order to check future routes, simulate them or see their length in time and
distance, you can turn off the GPS receiver. Then you can set the starting
point of the route to a different location than the current GPS position.
1. In the Navigation menu, tap .
2. If you already have a route, tap . If you are starting a new
route, tap .
Alpine_X009E_B5.pdf 68 5/9/2014 14:22:25