69
3. The first line is the start of the route, normally the current GPS
position. Tap and confirm your action at the warning message.
4. The Destination menu appears and you can select the start point of
the route the same way you select a destination.
5. When the new start point is set, tap .
6. The map returns with a transparent Vehimarker (showing that there
is no GPS reception). If an active route already existed, it is now
recalculated starting from the selected location.
Alpine_X009E_B5.pdf 69 5/9/2014 14:22:25
To Next Page
Loading...
