94
Street names sound correctly only if you use a native
voice profile for the country. You can decide whether the
application
tries to read the street names in a foreign country,
use road numbers in your language or
announces the manoeuvre only.
You can also decide whether you want an
announcement for distance manoeuvres or it is enough
to receive the information when the turn is near.
Tap this button to set the verbosity of the voice
instructions: how much they tell and how often they
speak.
Maps may contain information about the speed limits of
the road segments. The software is able to warn you if
you exceed the current limit. This information may not be
available for your region (ask your local dealer), or may
not be fully correct for all roads in the map. This setting
lets you decide whether you wish to receive visible
and/or audible warnings.
Adjust the slider to set the relative speed above which
the application initiates the warning.
The following warning types are available:
Audio warning: you receive a verbal warning when
you exceed the speed limit with the given
percentage.
Visual warning: the current speed limit is shown
on the map when you exceed it.
If you prefer to see the speed limit sign on the map all
the time (normally it is shown only if your speed exceeds
it), you can set it here.
Maps may contain driver alert information. Tap this
button to turn on or off these warnings and to set the
distance from the hazard to receive the warning at.
These can be set individually for the different warning
types.
You can control the volume of the following sound types:
Alpine_X009E_B5.pdf 94 5/9/2014 14:22:26
To Next Page
Loading...
