Alstom Micom P14DB - Logical Node: LPHD_STANDARD; Logical Node: MMTR_PRIV; Logical Node: MMXU_FOURIER_P145

MICS
P14DB-MC-EN-
7
MiCOM
40 Agile P14DB (MC)
15
1.4.12 Logical Node: LPHD_STANDARD
Description: Px40 Physical Device Information
LN Class: LPHD
Attribute
Attr. Type
Explanation
T
X
PhyNam DPL_STANDARD Physical device name plate
PhyHealth INS_HEALTH Physical device health
Proxy SPS_D Indicates if this LN is a proxy
PwrUp SPS_D Power up detected
1.4.13 Logical Node: MMTR_PRIV
Description: Metering
LN Class: MMTR
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
TotWh BCR_PRIV Net real energy since last reset
TotVArh BCR_PRIV Net reactive energy since last reset
SupWh BCR_PRIV Real energy supply (Energy flow towards bus bar)
SupVArh BCR_PRIV Reactive energy supply (Energy flow towards bus bar)
DmdWh BCR_PRIV Real energy demand (Energy flow from bus bar)
DmdVArh BCR_PRIV Reactive energy demand (Energy flow from bus bar)
MTRRs SPC_CTRL_PRV_NS Reset Energy Meters X
1.4.14 Logical Node: MMXU_FOURIER_P145
Description: Standard measurements (w.r.t Fourier Values - P145)
LN Class: MMXU
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
TotW MV_FLOAT Total active power (Total P)
TotVAr MV_FLOAT Total reactive power (Total Q)
TotVA MV_FLOAT Total apparent power (Total S)
TotPF MV_FLOAT Average power factor (Total PF)
Hz MV_FLOAT Frequency
PPV DEL_SEG_ANG Phase to Phase voltages
PhV WYE_SEG_RES_D Phase to Ground voltages
A1 WYE_SEG_RES_D Phase currents (Fourier Magnitudes)
A2 WYE_RES_ANG_D Phase currents (IN Measured)
A3 WYE_RES_ANG_D Phase currents (ISEF Magnitude)
W WYE_SEG Phase active power (P)
VAr WYE_SEG Phase reactive power (Q)