Alstom Micom P14DB - 1.7 Enumerated Type Definitions; Enumerated Type Semantics

P14DB
-MC-EN-7
MICS
(
MC) 32 MiC
OM 40 Agile P14DB
1.6.6 Component: Vector_MagnitudeAngle_Float
Comment: Complex vector (w.r.t Floating Point Magnitude and Angle values)
Parent Type: Vector
Attribute
Type
Enumeration
Comment
X
mag AnalogueValue_Float The magnitude of the complex value
ang AnalogueValue_Float The angle of the complex value (the unit is
degrees)
1.7 Enumerated type definitions
The following sub-sections specify the enumerations that are associated to some Common
Data Class attributes. The definition of the enumerations are according to IEC 61850-7-3
and IEC 61850-7-4 unless otherwise stated.
1.7.1 Enumerated type: AddCause
Description: AddCause
Ordinal
Semantic
0 Unknown
1 Not-supported
2 Blocked-by-switching-hierarchy
3 Select-failed
4 Invalid-position
5 Position-reached
6 Parameter-change-in-execution
7 Step-limit
8 Blocked-by-Mode
9 Blocked-by-process
10 Blocked-by-interlocking
11 Blocked-by-synchrocheck
12 Command-already-in-execution
13 Blocked-by-health
14 1-of-n-control
15 Abortion-by-cancel
16 Time-limit-over
17 Abortion-by-trip
18 Object-not-selected
1.7.2 Enumerated type: Beh
Description: Behaviour
Ordinal
Semantic
1 on
2 blocked
3 test
4 test/blocked
5 off