Alstom Micom P14DB - 1.5 Common Data Class Definitions; Functional Constraints Explained

MICS
P14DB-MC-EN-
7
MiCOM
40 Agile P14DB (MC)
21
Attribute
Attr. Type
Explanation
T
X
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
OpEx ACT_NO_SEG Breaker failure trip ("External trip") T
1.4.33 Logical Node: RDRE_BASIC
Description: Disturbance Recorder function (w.r.t Mandatory Attributes only)
LN Class: RDRE
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
RcdMade SPS_WD Recording made
FltNum INS_BASIC Fault number
1.4.34 Logical Node: XCBR_BASIC
Description: Circuit Breaker (w.r.t Mandatory Attributes Only)
LN Class: XCBR
Attribute
Attr. Type
Explanation
T
X
Mod INC_MOD Mode
Beh INS_BEH Behaviour
Health INS_HEALTH Health
NamPlt LPL_LN Name Plate
Loc SPS_WD Local operation
EEHealth INS_HEALTH External equipment health
OpCnt INS_BASIC Operation counter
Lock SPC_CTRL_PRV_NS Prevention, i.e Lock, Trip/Close operations of the Circuit
Breaker over IEC 61850
X
Pos DPC_CTRL_PRV_NS Switch position
BlkOpn SPC_STATUS Block opening
BlkCls SPC_STATUS Block closing
CBOpCap INS_CBCAP Circuit Breaker operating capacity
1.5 Common Data Class definitions
The definition tables for each of the Common Data Classes used in the Logical Node
definitions are presented in the following sub-sections.
From an application point-of-view the data attributes of a Common Data Class are classified
according to their specific use. The characterization of data attributes, and the services that
they support/provide, will be through the use of 'Functional Constraints'. The Functional
Constraints are specified by the table below:
FC Name
Semantic
Source Definition
BR Buffered reports IEC 61850-7-2
CF Configuration IEC 61850-7-2
CO Control IEC 61850-7-2
DC Description IEC 61850-7-2
EX Extended Definition IEC 61850-7-2