Need help?Do you have a question about the Alstom MX3EG1A and is the answer not in the manual?
Describes the process of enabling digital input for LB start and the sequence initiation.
Explains the device's comparison of bar voltage with rated voltage and deviation checks.
Details how the device compares bar frequency with rated frequency and deviation checks.
Explains the parallel command when thresholds are not tripped and load pulse functionality.
Describes the function of feeding an out-of-voltage bar (dead bar) with different modes.
Explains the storage and selection of two groups of settings: 'main' and 'spare'.
Details automatic diagnostic activities for fault signaling and device status.
Describes the composition and function of the six output relays.
Explains the allocation and function of the twelve LEDs for signalling.
Details the five optoinsulated digital inputs and their assignable functions.
Describes how to inhibit the device for safety or to avoid troubles.
Describes the main menu structure and navigation for reading information.
Details the main menu structure and navigation for reading information.
Explains how to view fault codes and diagnostic information.
Details the process of modifying parameters within the main settings.
Details the process of modifying parameters within the spare settings.
Provides precautions regarding electrostatic discharge to protect components.
Guides through the physical mounting and electrical connections of the device.
Outlines general safety regulations for electrical system tests and start-up.
Details the steps for final checks after initial power-up and configuration.
To Next Page
General