6
3. WORKING PRECAUTIONS
The manufacturer is not responsible of any damage that can possibly happens to the Matrix Audio Processor
outside the limits of the warranty or those produced by not taking care with the working precautions.
Mains voltage must be between the limits of the universal voltage power supply 90-265 VAC, 50-60 Hz
and the fuse must be the appropriate slow blow type: 2AT.
Damage caused by connection to improper AC voltage is not covered by any warranty.
DANGER: Inside the unit there are high voltages, do not open it. The unit does not contain
elements that could be repaired by the user. Whenever the MAP Audio Processor is
connected to the mains, it carries elements with high voltages. In order to disconnect the
unit completely, you must disconnect it from the mains.
CAUTION: Protect the unit from the rain and moisture. Ensure that no objects or liquids
enter it. If liquid is spilled into the unit, disconnect it from the mains and consult a
qualified service technician.
Do not place the unit close to heat sources.
4. INSTALLATION
4.1 UNPACKING
Before leaving the factory, each MAP Audio Processor has been carefully inspected and tested. Unpack
and inspect the unit for any damage that may have occurred during shipment. If any damage is found, does not
connect the unit to the mains; notify the salesperson immediately; a qualified service technician should inspect
the unit.
Save the original packaging, you could use if you need to transport the unit. SHIP THE MAP AUDIO
PROCESSOR WITH ITS ORIGINAL CASE OR INSTEAD USE A SIMILAR PACKAGING BOX.
4.2 MOUNTING
It is always recommended to mount the unit in a rack, either for mobile or fixed installations, for
protection, safety, aesthetics, etc. The ALTAIR MAP128/MAP1216 are designed for standard 19" rack mounting,
and takes up 1U high rack space.
For operation in ambient temperatures above 35ºC (100ºF) it is advisable to install the unit between
empty rack slots to allow free fresh air circulation above and below the unit.
Never allow the unit to direct sun exposition or other heat sources.
To Next Page
Loading...