EasyManua.ls Logo

Altec Lansing BackBeat 903 - Pairing Your Headphones and Bluetooth Adaptor

Altec Lansing BackBeat 903
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Headphones Phone Controls and Indicators
Action Indicator Light Tone
Turn on the
headphones
Press and hold the power/
pairing button for 2 seconds.
Glows blue for 2 seconds,
then turns off.
Four rising tones
Turn off the
headphones
Press and hold the power/
pairing button for 4 seconds.
Glows red for 4 seconds,
then turns off.
Four falling tones
Answer/end
a call
Tap the call control button. Three blue flashes (repeating)
while phone is ringing. Blue flash
every 2 seconds while on a call.
Three low tones
(repeating) while phone
is ringing. Single low
tone when call connects
or when disconnects.
Make a call Enter the number on your
phone and press send.
Blue flash every 2 seconds
while call is in progress.
Brief tones,
then ringing
Reject a call Press and hold the call control
button for 2 seconds.
None Single long
low tone
Check battery
power
With headphones powered
on, tap the power/pairing
button. The indicator flashes
red to show the charge level.
Red flashes: Battery level:
1 More than 2/3 full
2 1/3 - 2/3 full
3 Less than 1/3 full
None

Other manuals for Altec Lansing BackBeat 903

Related product manuals