Operating Mode Selection
select:
After selection is complete, press the rotary control to confirm.
confirm:
If the selection is valid, the LMAP main menu is displayed with a green confirmation box.
Press the rotary control again to confirm a second time.
If the selection is not valid, the main menu is displayed with a yellow confirmation box.
The only choice is to press the ESCAPE key to abort.
Optionally, at any time during the selection process pressing the ESCAPEkey will abort selection and
return to the LMAP main menu.
© 2014 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 22/78
AltecManual_Feb3.docx / 1/31/2014 1:03:00 PM/ Issue A / cc.
https://cranemanuals.com
To Next Page