Preface
This unit is the result of Altec’s advanced technology and quality awareness in design, engi-
neering, and manufacturing. At the time of delivery from the factory, this unit met or exceeded
all applicable requirements of the American National Standards Institute. All information,
illustrations, and specications contained within this manual are based on the latest product
information available at the time of publication. It is essential that all personnel involved in the
use and/or care of this unit read and understand the Operator’s Manual. Keep this manual
with the unit.
Given reasonable care and operation, according to the guidelines set forth in the manuals
provided, this unit will provide many years of excellent service before requiring major main-
tenance.
Impacts to and excessive forces on the hydraulic utility equipment, through vehicular acci-
dents, rollovers, excessive loading, and the like, may result in structural damage not obvious
during a visual inspection. If the hydraulic utility equipment is subjected to such impacts or
forces, a qualied person may need to perform additional testing such as acoustic emissions,
magnaux or ultrasonic testing as applicable. If structural damage is suspected or found,
contact Altec for additional instructions.
WARNING
Death or serious injury can result from component failure. Continued use of a mobile
unit with hidden damage could lead to component failure.
Never alter or modify this unit in any way that might affect the structural integrity or operational
characteristics without the specic written approval of Altec Industries, Inc. Unauthorized
alterations or modications will void the warranty. Of greater concern, is the possibility that
unauthorized modication could adversely affect the safe operation of this unit, resulting in
personal injury and/or property damage.
DANGER
Death or serious injury will result from unprotected contact with energized conductors.
Non-insulating units have no dielectric rating. Maintain safe clearances, as dened by
federal, state, and local authorities, and your employer, from energized conductors.
No unit can provide absolute safety when in proximity to energized conductors. No unit is
designed or intended to replace or supersede any protective device or safe work practice
relating to work in proximity to energized conductors. When in proximity to energized con-
ductors, this unit shall only be used by trained personnel using their company’s accepted
work methods, safety procedures, and protective equipment. Training manuals are available
from a variety of sources.
Set-up requirements, work procedures, and safety precautions for each particular situation
are the responsibility of the personnel involved in the use and/or care of this unit.
https://cranemanuals.com
To Next Page
Loading...