Important Safety Instructions
Before using the AlterG Treadmill please familiarize yourself with this manual so that
you may operate the AlterG Treadmill in a safe and effective manner. Instructions may
be found throughout this manual, on the control console and on labels applied to the
machine. We want your experience with the AlterG Treadmill to be safe and enjoyable,
so please make sure you read and understand this entire manual before operating your
system.
DANGER: To avoid imminently hazardous situation that will result in
serious injury or death.
• DO NOT modify the plug provided with the treadmill. The AlterG Treadmill
requires a 20A 220 VAC outlet protected by a 20 amp circuit breaker. The AlterG
Treadmill comes equipped with a 6-20P NEMA plug. If the provided plug will not
fit in the outlet, have a proper outlet installed by a qualified electrician.
• Do not use any electrical adapters. To do so could result in an electrical shock
hazard.
• Do not operate the AlterG Treadmill in wet or damp environments.
• Do not operate the heart rate monitor transmitter in conjunction with an electrical
heart Pacemaker or similar device. The transmitter may cause electrical
disturbances, which can interfere with pacemaker function.
• NOTE: the disconnect plug is accessible after installation. Always unplug all
power to the AlterG Treadmill before cleaning or servicing.
• Do not soak any part of the AlterG Treadmill with liquid during cleaning; use a
sprayer or damp cloth. Keep all liquids away from electric components. Always
unplug the machine before cleaning and maintenance.
• Only an authorized technician should service the system.
• Do not place any liquids on any part of the AlterG Treadmill.
• Do not unplug or alter any of the internal wiring on the machine after installation.
• Do not operate where aerosol (spray) products are being used or where oxygen
is being administered.
To Next Page
