Why does my AlterG Via400 Treadmill show an nPc error?
The 'nPc' error on the AlterG Treadmill indicates under pressure during use. This occurs because the pressure did not reach the set point.
What does error code C06 mean on my AlterG Via400?
The 'C06' error on the AlterG Treadmill indicates a load cell error. This means the deck weight measured outside of the expected range of 200lbs +/- 50.
What does C01 error mean on AlterG Treadmill?
The 'C01' error on the AlterG Treadmill indicates that the base weight is out of tolerance. The base weight deviates +/- 5% from the last stored value.
Why am I getting a C04 error on my AlterG Via400 Treadmill?
The 'C04' error on the AlterG Treadmill means there is a bad calibration curve. This is due to not enough data points collected during calibration.
What causes the C05 error on AlterG Via400?
The 'C05' error on the AlterG Treadmill indicates over pressure during calibration. This happens when the user prematurely raised to 25% of body weight.
Consulting a physician and fitness trainer before starting an exercise program is advised.
Specifies the recommended electrical outlet/power source for the AlterG Anti-Gravity Treadmill.
Details requirements for treadmill placement, surface, space, and electrical grounding.
Explains how the AlterG Treadmill uses air pressure difference for body weight support.
Describes the pressure system and the specialized shorts used for sealing.
Instructions on turning on the treadmill and initial system checks.
Guidance on adjusting cockpit height, stepping in, and zipping into the enclosure.
Essential instructions on correctly using the safety lanyard for emergency stops.
How to adjust body weight percentage, treadmill direction, and speed during use.
Details on session time, calories, pace, distance, and heart rate displayed.
Instructions for using a Polar chest strap for heart rate monitoring.
Information on gait metrics measured and how to record gait data.
Explains gait features like cross-over gait, running mode, and how to view reports.
How to record pain levels on a scale of 0-10 during an exercise session.
How to view previous pain recordings and the associated body weight data.
Process for creating, emailing, or exporting session reports, gait data, and pain measurements.
How to access the settings menu and navigate its options.
Functions like restarting, shutting down, calibrating, and accessing tech support.
Details safety warnings and identification labels found on the treadmill.
Information on compliance labels and the location of various equipment labels.
Guidelines for daily cleaning, inspection, and identifying abnormal operation.
Weekly, monthly, and annual maintenance procedures for the treadmill.
Maintenance advice for seasons, windows, shorts, and fabric enclosure.
Steps for contacting AlterG for repairs and questions to investigate.
List of error codes displayed by the system and their meanings.
To Next Page
General
